Veneer on all exposed surfaces is American Black Walnut, Cherry or Maple. Outside surface veneers are book matched to provide proper grain consistency and uniform grain appearance. Drawer fronts are vertical grain cherry, maple or walnut veneers and matched in selected sets to ensure proper veneer balance and uniform grain appearance.
Wood Veneer Tops
1 3/16” thick tops utilizing 3-ply construction, shaped with six edge details. Top cores are high density fiberboard. Cherry, maple or walnut veneer tops are standard. High pressure laminate tops are optional, with many standard finishes having
matching laminate tops available (call customer service for options).
Modesty Panels and End Panels
End panels are 29/32” thick with a 3-ply construction and a solid lumber band on the bottom edge of the panel to prevent tear out. Modesty panels are ¾” thick, 3-ply construction. All veneers are vertical grain cherry, maple or walnut veneers matched to ensure proper veneer balance, provide proper grain consistency and uniform grain appearance. Full modesty panels are standard for desk, bridge and
kneespace credenzas with optional half modesty options available.
Drawer sides and backs are solid plywood, 7/16” thick. Drawer fronts are 3-ply hardwood construction, ¾” thick with book matched veneers to provide proper grain consistency and uniform grain appearance. All drawers utilize five sided drawer construction. Drawers are assembled with dovetail construction in all four corners. Drawer bottoms are 7/32” 3-ply hardwood dado construction.
Doors are 3-ply construction with vertical grain cherry, maple or walnut veneers and matched in selected sets to ensure proper veneer balance and uniform grain appearance. European style hidden hinges are used on all doors. Tempered glass conforming to ASTMC 1048 is used in all glass doors.
Shelves are 3-ply construction with a ¼” cherry, maple or walnut rim on the front edge. All shelves are full depth of the interior compartment unless specified otherwise. Faces are book matched cherry, maple or walnut veneer. Hutch shelves are cherry, maple or walnut faced on both sides. A minimum of one adjustable or fixed shelf is provided with each cabinet storage unit (see individual unit for details). Adjustable shelves are provided with metal adjustable shelf hardware supports.
Height adjustable leveling glides are mounted in each corner with a threaded metal insert capped with a nylon glide that is height adjustable to approx. 1 ½” to ensure proper leveling of the unit to varying floor conditions.
Drawer Suspensions – File, box, pencil and center drawers utilize steel “A” grade heavy duty metal slides for smooth operation. All pedestal drawers have 100 % full extension slides. All suspension systems feature positive and cushioned in/out stops. All box, center, and tray drawers are removable without tools and the suspensions are designed to prevent accidental removal.
Locks – All desks and credenzas utilize pedestal locking. Lateral files are keyed as standard and feature central locking with anti-tip drawer interlock systems. Individual pieces are shipped random keyed. Units may be keyed alike upon special request. A minimum of fifty key changes (numbers) are available. Core lock changes are available (contact customer service).
Drawer Pulls – Finger pulls are standard with the optional replacement for four drawer pull options (in either black or nickel finish) and one drawer pull option (in brass) for an additional up-charge (see attached for details).
Hinges – European style hidden hinges on all hinged doors.
Wire Management – Black wire management grommets are standard on all returns and bridge work surfaces located in back center of the tops. Black wire management access grommets are standard on all credenzas, hutches, overhead storage units and computer tables located in back panel. Optional additional black wire management grommets, wall access cut-outs, wiring harness and wiring channels along with integrated cable management to conceal power and data cords are also available. Optional data ports accessible at work surface height (see accessories).
Construction technique is mortise and tenon, groove and tenon, heavily glue blocked with hardwood cleats for maximum strength.
File drawers use an easily adjustable filing rail system which can be positioned to accommodate front to back or side to side letter or legal filing.
All exposed surfaces are finished with a UV inhibitor catalyzed varnish finish to ensure maximum durability, chemical resistance, color retention and clarity. All exterior surfaces are finished in the following multi-step sequence: sap stain, NGR stain, wash coat, wash coat sand, filler spray, filler wipe, sealer spray, sealer sand, varnish spray, varnish sand, varnish spray. Moisture content for all wooden parts is
between 5 - 9% prior to sealing. Drawer interiors and exteriors are UV prefinished with sealer, sealer sand, and varnished. Custom finish matches are available, contact customer service for request
HPL Matching high pressure laminate substituted for wood top
- Call customer service for matching finish selections
PULLS Optional hardware pulls in place of standard finger pull
CD Add center drawer
FF Change PBF pedestal to F/F
CPU Change PBF or FF pedestal to CPU pedestal
- inside dimensions: 14 3/16”Wx17 13/16”Dx22 3/8”H
- hinged door (non-locking), two ventilation slots in top and inside end panel grommet
PNT Change lateral file or file center pedestal to printer pedestal
- inside dimensions: 27 ½”Wx17 13/16”Dx22 3/8”H
- slide out printer shelf, wall access cut-out in back modesty and inside end panel grommet
LK Locking of individual doors, drawers or pedestals (where not standard)
GR Wire mgmt grommet (note location)
WA Wall access cut-out (modesty panels on bridges, credenzas, desks and returns)
HF Optional half modesty panel on credenza’s and returns only
AHM Electronic height adjustable mechanism added to worksurface, lifting column, control box, control pendant,
with memory settings, motor cable, main power cable, anti-collision dongle. Lower metal lifts and anti-tip
brackets. Adjusts from 30” - 44”H. Contact customer service for additional information.