You have not viewed any products recently.

 
 
W_Cover_2007_Heritage_U-group_1_026 Enlarge View
W_Cover_2007_Heritage_U-group_1_026
  • W_Cover_2007_Heritage_Group_NW_-_Table_desk_023
  • W_Cover_50_Series_Transaction_top
  • W_Cover_50_U_GROUP_W_OSU_AmberCherry
  • W_Cover_50-PM_L_Unit_NW
  • W_Cover_50PM_U_group___WC___BC2M
  • W_Cover_50PM_SPL72ER48R_BCO52
  • Cover_Heritage_File_Center_Detail_1_Open
  • W_Cover_2007_Heritage_U-group_1_026
 
  • W_Cover_2007_Heritage_Group_NW_-_Table_desk_023
  • W_Cover_50_Series_Transaction_top
  • W_Cover_50_U_GROUP_W_OSU_AmberCherry
  • W_Cover_50-PM_L_Unit_NW
  • W_Cover_50PM_U_group___WC___BC2M
  • W_Cover_50PM_SPL72ER48R_BCO52
  • Cover_Heritage_File_Center_Detail_1_Open
  • W_Cover_2007_Heritage_U-group_1_026

Heritage II Series

Classic traditional styling to fit any office environment.  The Heritage II Series features a wide range of componenets with or without decorative panel moulding.  Catalyzed varnish finish, mortise and tenon - groove and tenon construction, full extension file drawers with dovetail construction and antique brass pulls are standard.  All items are available in a choice of 20 cherry, mahogany, oak and walnut finishes.  






Features

Top Sellers

Prices Starting From

Share With Your Friends

 
 
 
Veneer
 
Veneer on all exposed surfaces is #1 plain sliced American Black Walnut, Cherry or Oak. Outside surface veneers are book matched to provide proper grain consistency and uniform grain appearance. Drawer fronts are vertical grain walnut, cherry or oak veneers and matched in selected sets to ensure proper veneer balance and uniform grain appearance.
 
Wood Veneer Tops
 
1 3/16” thick tops utilizing 3-ply construction, shaped with a traditional style edge detail. Top cores are high density MDF fiberboard. Walnut,
cherry or oak veneer tops are standard. High pressure laminate tops are optional, with many standard finishes having matching laminate tops available (call customer service for options).
 
Modesty Panels and End Panels
 
Panels are ¾” thick, 3-ply construction with book matched veneers to provide proper grain consistency and uniform grain appearance. All veneers are vertical grain walnut, cherry or oak veneers matched to ensure proper veneer balance. Decorative panel moulding is crafted from solid walnut, cherry or oak with mitered corners and hand fitted to each panel. Units may be specified with or without decorative panel moulding. Full modesty panels are standard for desk, bridge, and kneespace credenzas with optional
half modesty options available.
 
Drawers
 
Drawer sides and backs are solid plywood 7/16” thick. Drawer fronts are 3-ply hardwood construction, ¾” thick with book matched veneers
to provide proper grain consistency and uniform grain appearance. All drawers utilize five sided drawer construction. Drawers are assembled with dovetail construction in all four corners. Drawer bottoms are 7/32” 3-ply hardwood dado construction.
 
Doors
 
Doors are 3-ply construction with vertical grain walnut, cherry or oak veneers and matched in selected sets to ensure proper veneer balance and uniform grain appearance. European style hidden hinges are used on doors where applicable. Tempered glass conforming to ASTMC 1048 is used in all glass doors.
 
Shelves
 
Shelves are 3-ply construction with a ¼” walnut, cherry or oak rim on the front edge. All shelves are full depth of the interior compartment unless specified otherwise. Faces are book matched walnut, cherry or oak veneer.  Hutch shelves are walnut, cherry or oak faced on both sides. A minimum of one adjustable or fixed shelf is provided with each cabinet storage unit (see individual unit for details). Adjustable shelves are provided with metal adjustable shelf hardware supports.
 
Bases
 
Bases are solid hardwood mitered at all four corners. Height adjustable leveling glides are mounted in each corner with a threaded metal insert capped with a nylon glide that is height adjustable to approx. 1 ½” to ensure proper leveling of the unit to varying floor conditions.
 
Hardware
 
Drawer Suspensions – File, box, pencil and center drawers utilize steel “A” grade heavy duty metal slides for smooth operation. All pedestal drawers have 100 % full extension slides. All suspension systems feature positive and cushioned in/out stops. All box, center, and tray drawers are removable without tools and the suspensions are designed to prevent accidental removal.
 
Locks – All desks and credenzas utilize pedestal locking. Lateral files are keyed as standard and feature central locking with anti-tip drawer interlock systems. Individual pieces are shipped random keyed. Units may be keyed alike upon special request. A minimum of fifty key changes (numbers) are available. Core lock changes are available (contact customer service).
 
Drawer Pulls – Traditional style, bail type drawer pulls in antique brushed brass finish are standard.
 
Hinges – European style hidden hinges are used on doors where applicable.
 
Wire Management – Black wire management grommets are standard on all returns and bridge work surfaces located in back center of the tops. Black wire management access grommets are standard on all credenzas, hutches, overhead storage units and computer tables located in back panel. Optional additional black wire management grommets, wall access cut-outs, wiring harness and wiring channels along with integrated cable management to conceal power and data cords are also available. Optional data ports accessible at work surface height (see accessories).
 
Chassis Construction
 
Construction technique is mortise and tenon, groove and tenon, heavily glue blocked with hardwood cleats for maximum strength.
 
Filing
 
File drawers use an easily adjustable filing rail system which can be positioned to accommodate front to back or side to side letter or legal filing.
 
Finish
 
All exposed surfaces are finished with a UV inhibitor catalyzed varnish finish to ensure maximum durability, chemical resistance, color retention and clarity. All exterior surfaces are finished in the following multi-step sequence:  sap stain, NGR stain, wash coat, wash coat sand, filler spray, filler wipe, sealer spray, sealer sand, varnish spray, varnish sand, varnish spray.  Moisture content for all wooden parts is between 5 - 9% prior to sealing.  Drawer interiors and exteriors are UV prefinished with sealer, sealer sand, and varnished. Custom finish matches are available, contact customer service for request.

 Heritage_Line_drawing

HPL          Matching high pressure laminate substituted for wood top 
                  - Contact customer service for matching finish selections
BW           Burl walnut top 
MBC         Madrone burl top (cherry species only)
LTH          Leather inlay (desk tops only) – black, burgundy, forest green
PM           Optional panel moulding added 
CD            Center drawer (non-locking) 
CDCL       Center drawer and central locking 
WSL         Dictation slide (left) added to standard box/file pedestal 
WSR        Dictation slide (right) added to standard box/file pedestal 
FF             Change BF pedestal to FF 
BB             Brushed brass pulls (replaces standard antique brass pulls) 
CPU         Change BF or FF pedestal to CPU pedestal 
                  - inside dimensions: 14 3/16”Wx17 13/16”Dx22 3/8”H
                  - hinged door (non-locking), two ventilation slots in back panel and inside end panel grommet
PNT         Change lateral file or file center pedestal to printer pedestal 
                 - inside dimensions: 27 ½”Wx17 13/16”Dx22 3/8”H
                 - slide out printer shelf, wall access cut-out in back modesty and inside end panel grommet
BBF         Change BF pedestal to BBF 
LK            Locking of individual doors, drawers or pedestals (where not standard) 
GR           Wire mgmt grommet (note location) 
WA          Wall access cut-out (modesty panels on bridges, credenzas, desks and returns) 
FS            Freestanding unit - change from connecting unit (notched) to freestanding unit 
HF            Half modesty panel 
AHM        Electronic height adjustable mechanism added to worksurface, lifting column, control box, control pendant, with
                memory settings, motor cable, main power cable, anti-collision dongle. Lower metal lifts and anti-tip brackets.
                Adjusts from 30” - 44”H.  Contact customer service for additional information.

Gerogain

 

Sign up to receive updates

 
close (X)