You have not viewed any products recently.

 
 
Cover_Desk_Room_Grouping_1 Enlarge View
Cover_Desk_Room_Grouping_1
  • Cover_Kuebler_U-group_in_Cherry
  • Cover_Kuebler_Detail
  • Cover_Kuebler_Drawer_Detail
  • Cover_Kuebler_Edge_Hardware_Detail
  • Cover_Kuebler_group_with_DP_Desk
  • Cover_6000FR72_Credenza_Hutch
  • Cover_Desk_Room_Grouping_1
 
  • Cover_Kuebler_U-group_in_Cherry
  • Cover_Kuebler_Detail
  • Cover_Kuebler_Drawer_Detail
  • Cover_Kuebler_Edge_Hardware_Detail
  • Cover_Kuebler_group_with_DP_Desk
  • Cover_6000FR72_Credenza_Hutch
  • Cover_Desk_Room_Grouping_1

Kuebler Series

The mission style of furniture reflects the grace of uncomplicated elegance. Though simple in design, mission furniture represents a quality standard of old world craftsmanship. Our collection of mission office furniture brings you both beauty and excellence. Not only will your mission office furniture be made to the highest degree of fine workmanship, it will feel as though it was crafted with especially you in mind. 






Prices Starting From

Share With Your Friends

 
 
Veneer
 
Veneer on all exposed surfaces is #1 select plain sliced oak or cherry. Outside surface veneers are bookmatched to provide proper
grain consistency. Drawer fronts are vertical grain and matched in selected sets to ensure proper veneer balance. Inside faces of end
panels and back panels are random matched.
 
Wood Veneer Tops
 
Tops are 1-3/16” thick, 3-ply construction with solid oak or cherry rims on all four sides.
 
End Panels
 
All end panels are 3-ply construction, 3/4” thick with solid oak or cherry rims on front and back edge. End panels feature adjustable
levelers set in solid hardwood to prevent glide tear-out.
 
Modesty Panels
 
Modesty panels are 3/4” thick, 3-ply construction with bookmatched approach side veneer face.
 
Drawers
 
Drawer sides and backs are solid beech lumber 7/16” thick. Drawer fronts are 3-ply construction, 3/4” thick. Drawer bottoms are of 3-ply
hardwood construction. Drawers are assembled with dovetail construction in all four corners. Drawer fronts are securely mounted
onto the drawer box. Center drawer pen trays are made of solid hardwood.
 
Hardware
 
Drawer Suspensions – File drawers utilize an “A” grade heavy duty 100% full extension metal ball bearing slides for smooth operation.
Box drawer and center drawer heavy duty ball bearing slides have 100% full extension. All suspensions systems feature positive and
cushioned in/out stops.
 
Locks – Desks, credenza and returns use pedestal locking.  Individual pieces are shipped random keyed. Units may be keyed
alike upon special request. Lateral files are keyed as standard and feature drawer interlocks.
 
Drawer/Door Pulls – Mission style drawer and door pulls are standard in a Pewter finish.
 
Wire Management – Black wire access grommets are standard on all returns, bridges and worksurfaces located in back center of top.
Black wire access grommets are standard on all credenzas, hutches, overhead storage units and computer tables located in back panel.
 
Chassis Construction
 
Construction technique is mortise and tenon, groove and tenon, heavily glue blocked for maximum strength.
 
Filing
 
All file drawers utilize a black powder coated metal filing rod system to accommodate legal, letter, and small EDP filing
requirements.
 
Finish
 
All surfaces are finished in catalyzed varnish to ensure maximum durability, chemical resistance, color retention and clarity. All
exterior surfaces are finished in the following multi-step sequence:  Sap stain, NGR stain, washcoat, washcoat sand, filler spray and
wipe, sealer spray, sealer sand, varnish spray, varnish sand, varnish spray.  Drawer interiors and exteriors are finished with sealer, sealer sand and varnished.

Kuebler_Line_drawing

HPL          Matching high pressure laminate substituted for wood top 
                  - Call customer service for matching finish selections
CD            Add center drawer
CDCL      Center Drawer / Central locking (desks only) 
FF             Change PBF pedestal to F/F
CPU         Change PBF or FF pedestal to CPU pedestal 
                  - inside dimensions: 14 3/16”Wx17 13/16”Dx22 3/8”H
                  - hinged door (non-locking), two ventilation slots in top and inside end panel grommet
PNT          Change lateral file or file center pedestal to printer pedestal
                  - inside dimensions: 27 ½”Wx17 13/16”Dx22 3/8”H
                  - slide out printer shelf, wall access cut-out in back modesty and inside end panel grommet
LK             Locking of individual doors, drawers or pedestals (where not standard) 
GR            Wire mgmt grommet (note location) 
WA            Wall access cut-out (modesty panels on bridges, credenzas, desks and returns) 
HF             Optional half modesty panel on credenza’s and returns only 
AHM          Electronic height adjustable mechanism added to worksurface, lifting column, control box, control pendant, 
                  with memory settings, motor cable, main power cable, anti-collision dongle. Lower metal lifts and anti-tip 
                  brackets. Adjusts from 30” - 44”H.  Contact customer service for additional information.

kUEBLER_FINISHES

kUEBLER_hARDWARE

 

Sign up to receive updates

 
close (X)