Veneer on all exposed surfaces is #1 plain sliced American black walnut, cherry, or maple. Outside surface veneers are book matched
to provide proper grain consistency. Drawer fronts are highly figured burl walnut or plain sliced cherry or maple veneers and
matched in selected sets to ensure proper veneer balance.
Wood Veneer Tops
Tops are 3-ply construction with solid walnut, cherry or maple hardwood rims, shaped with a traditional style edge detail. Rims on all
four sides are solid walnut, cherry or maple with tongue and groove construction precisely mitered on all four corners. Sketch face and
leather inlay are optional.
Modesty Panels and End Panels
End panels are 3/4” thick, 3-ply construction with book matched veneers. Decorative panel moulding is crafted from solid walnut,
cherry, or maple with mitered corners and hand fitted to each panel.
Drawer sides and backs are solid beech lumber 7/16” thick. Drawer fronts are 5-ply hardwood construction. Drawers are assembled
with dovetail construction in all four corners. All desk drawers are grooved for drawer partitions. Center drawer pen trays are of solid
Doors are 5-ply construction with burl walnut or plain sliced cherry or maple veneer faces matched in sets.
Shelves are 3-ply construction with a k” walnut, cherry, or maple rim on the front edge. Faces are random matched walnut, cherry, or
maple veneer. Hutch shelves are walnut faced, cherry or maple faced on both sides.
Bases are solid walnut, cherry, or maple mitered at all four corners. Units may be specified with conventional or Georgian Scroll bases.
Adjustable leveling glides are provided to ensure proper leveling of the unit to varying floor conditions.
All units have 1/8” thick hardboard security/dust bottoms.
Drawer Suspensions – File, box, pencil and center drawers utilize “A” grade heavy duty metal slides for smooth operation. All
pedestal drawers have 100% full extension slides. All suspension systems feature positive and cushioned in/out stops.
Locks – Desks center drawer locks all drawers. Credenzas use pedestal locking. Individual pieces are shipped random keyed.
Units may be keyed alike upon special request. Lateral files are keyed as standard and feature drawer interlocks.
Drawer Pulls – Traditional style, bail type drawer pulls in antique brushed brass finish are standard.
Wire Management – Black grommets are standard on all returns, bridge work surfaces located in the back center of the tops. Black
wire access grommets are standard on all credenzas, hutches, overhead storage units and computer tables in back panel.
Construction technique is mortise and tenon, groove and tenon, heavily glue blocked with hardwood cleats for maximum strength.
File drawers use an easily adjustable filing system which can be positioned to accommodate letter or legal filing.
All surfaces are catalyzed varnish full-fill finish to ensure maximum durability, chemical resistance, color retention and clarity. All
exterior surfaces are finished in the following multi-step sequence: Sap stain, NGR stain, washcoat, washcoat sand, filler spray, filler
wipe, sealer spray, sealer sand, varnish spray, varnish sand, varnish spray and polish. Tops are full filled and hand rubbed. Drawer
interiors are finished with sealer, sealer sand and lacquer. Drawer interiors and exteriors are finished with stain, sealer, sealer
sand and varnished.
HPL Matching high pressure laminate substituted for wood top (Contact customer service for matching finish selections)
BW Burl walnut top
MBC Madrone burl top (cherry species only)
LTH Leather inlay (desk tops only) – black, burgundy, forest green
GS Georgian scroll base (replaces standard box base)
LW Leather wrapped pullss (replace standard antique brass pulls)
FF Change PBF pedestal to F/F (no writing slide above pedestal)
CPU Change PBF or FF pedestal to CPU pedestal
- inside dimensions: 14 3/16”Wx17 13/16”Dx22 3/8”H
- hinged door (non-locking), two ventilation slots in back panel and inside end panel grommet
PNT Change lateral file or file center pedestal to printer pedestal
- inside dimensions: 27 ½”Wx17 13/16”Dx22 3/8”H
- slide out printer shelf, wall access cut-out in back modesty and inside end panel grommet
LK Locking of individual doors, drawers or pedestals (where not standard)
FS Freestanding unit - change from connecting unit (notched) to freestanding unit
HF Half modesty panel
GR Wire mgmt grommet (note location)
WA Wall access cut-out (modesty panels on bridges, credenzas, desks and returns)
AHM Electronic height adjustable mechanism added to worksurface, lifting column, control box, control pendant,
with memory settings, motor cable, main power cable, anti-collision dongle. Lower metal lifts and anti-tip brackets.
Adjusts from 30” - 44”H. Contact customer service for additional information.