Veneer on all exposed surfaces is #1 select plain sliced Cherry. Outside surface veneers are book matched to provide proper grain consistency and uniform grain appearance. Drawer fronts are vertical grain cherry matched in selected sets to ensure proper veneer balance and uniform grain appearance. Optional decorative burl walnut inlay is available.
Wood Veneer Tops
1 3/16” thick tops utilizing 3-ply construction with solid cherry wood band edging. Top cores are high density particle board. Cherry veneer tops are standard. High pressure laminate tops are optional, with many standard finishes having matching laminate tops available (call customer service for options).
Modesty Panels and End Panels
End panels are 3/4” thick, 3-ply construction with book matched veneers to provide proper grain consistency and uniform grain appearance. Modesty panels are ¾” thick, 3-ply construction with book matched veneers to provide proper grain consistency and uniform grain appearance
All veneers are vertical grain cherry veneers matched to ensure proper veneer balance. Full modesty panels are standard for desk, bridge, and kneespace credenzas with optional half modesty options available. Optional decorative burl walnut inlay veneer pedestal backs are available.
Drawer sides and backs are wood, 7/16” thick. Drawer fronts are 3-ply hardwood construction, ¾” thick with book matched veneers to provide proper grain consistency and uniform grain appearance. Optional decorative burl walnut inlay is available. All drawers utilize five sided drawer construction. Drawers are assembled with dovetail construction in all four corners. All desk drawers are grooved for drawer partitions. Drawer bottoms are 7/32” 3-ply
hardwood dado construction.
Doors are 3/4” thick 3-ply construction with vertical grain cherry veneers matched in selected sets to ensure proper veneer balance and uniform grain appearance. Optional decorative burl walnut inlay veneer is available.European style hidden hinges are used on all doors. Tempered glass conforming to ASTMC 1048 is used in all glass doors.
Shelves are 3-ply construction with a ¼” cherry rim on the front edge. All shelves are full depth of the interior compartment unless specified otherwise. Faces are book matched cherry veneer. Hutch shelves are cherry faced on both sides. A minimum of one adjustable or fixed shelf is provided with each cabinet storage unit (see individual unit for details). Adjustable shelves are provided with metal adjustable shelf hardware supports.
Bases are solid hardwood mitered at all four corners. Base profiles coordinate with the top edge detail shape. Height adjustable leveling glides are mounted in each corner with a threaded metal insert capped with a nylon glide that is height adjustable to approx. 1 ½” to ensure proper leveling of the unit to varying floor conditions.
Drawer Suspensions – File, box, pencil and center drawers utilize steel “A” grade heavy duty metal slides for smooth operation. All pedestal drawers have 100 % full extension slides. All suspension systems feature positive and cushioned in/out stops. All box, center, and tray drawers are removable without tools and the suspensions are designed to prevent accidental removal.
Locks – All desks and credenzas utilize pedestal locking. Lateral files are keyed as standard and feature central locking with anti-tip drawer interlock systems. Individual pieces are shipped random keyed. Units may be keyed alike upon special request. A minimum of fifty key changes (numbers) are available. Core lock changes are available (contact customer service).
Drawer Pulls – Four drawer pull options are available in either black or nickel finish and one drawer pull option is available in brass (see attached for details).
Hinges – European style hidden hinges on all hinged doors.
Wire Management – Black wire management grommets are standard on all returns and bridge work surfaces located in back center of the tops. Black wire management access grommets are standard on all credenzas, hutches, overhead storage units and computer tables located in back panel. Optional additional black wire management grommets, wall access cut-outs, wiring harness and wiring channels along with integrated cable management to conceal power and data cords are also available. Optional data ports accessible at work surface height (see accessories).
Construction technique is mortise and tenon, groove and tenon, heavily glue blocked with hardwood cleats for maximum strength.
File drawers use an easily adjustable filing rail system which can be positioned to accommodate front to back or side to side letter or legal filing.
All exposed surfaces are finished with a UV inhibitor catalyzed varnish finish to ensure maximum durability, chemical resistance, color retention and clarity. All exterior surfaces are finished in the following multi-step sequence: sap stain, NGR stain, wash coat, wash coat sand, filler spray, filler wipe, sealer spray, sealer sand, varnish spray, varnish sand, varnish spray. Moisture content for all wooden parts is
between 5 - 9% prior to sealing. Drawer interiors and exteriors are UV prefinished with sealer, sealer sand, and varnished. Custom finish matches are available, contact customer service for request.
HPL Matching high pressure laminate substituted for wood top
- Call customer service for matching finish selections
CD Center Drawer
CDCL Center drawer with central locking (desks only)
FF Change BBF pedestal to F/F
CPU Change BBF or FF pedestal to CPU pedestal
- inside dimensions: 14 3/16”Wx17 13/16”Dx22 3/8”H
- hinged door (non-locking), two ventilation slots in back panel and inside end panel grommet
PNT Change lateral file or file center pedestal to printer pedestal
- inside dimensions: 27 ½”Wx17 13/16”Dx22 3/8”H
- slide out printer shelf, wall access cut-out in back modesty and inside end panel grommet
LK Locking of individual doors, drawers or pedestals (where not standard)
GR Wire mgmt grommet (note location)
WA Wall access cut-out (modesty panels on bridges, credenzas, desks and returns)
HF Optional half modesty panel
AHM Electronic height adjustable mechanism added to worksurface, lifting column, control box, control pendant, with memory settings,
motor cable, main power cable, anti-collision dongle. Lower metal lifts and anti-tip brackets. Adjusts from 30” - 44”H. Contact
customer service for additional information.